Panoramic Adapter Tap Boards
The Panoramic Adapter Tap Board (PAT Board) is a Printed Circuit Board which connects the IF signal from a Radio Receiver or Transceiver to the Antenna Input of the SDRplay RSP1A , RSP2 or RSP2pro Software Defined Radio (SDR) Receiver, or another type of SDR Receiver covering the IF Frequency in question.
The PAT Board, designed by Dave G4HUP (SK), allows for the display of Received Signals on the Computer screen connected to the SDRplay Receiver.
You can also use the SDRplay RSP as a second receiver in addition to the frequency displayed on the main dial of the radio.
Dave's Website hupRF.com, will continue to be maintained by SDR-Kits in recognition of Dave's contribution to the Radio Hobby, and to share his wealth of technical knowledge.
There are a number of YouTube videos which demonstrate how to setup and use the new functionality- one example is by K4AX which is implemented on the Yaesu FT857.
For more information on the PAT board and supported Radios,check out the following document: Which PAT for your rig?
The following PAT boards (Assembled or Kit), and Installation Kits are available from our Webshop
Please note that, due to high demand, we are currently sold out of most of the PAT Boards. New stock is expected by 31st March, 2018.
6 MHz Panoramic Adapter Board by hupRF (Assembled), suitable for Elekraft K1, K2
12 MHz Panoramic Adapter Board by hupRF (Assembled), suitable for: IC201/202, IC821 (2nd IF), TS700, IC910 (2nd IF), IC1271 (2nd IF)
FT221/225, FT290, FT920 (2nd IF), TS2000 (2nd IF), TS590, TS700, TS790E
(2nd IF), TS120/130/140/180, TenTec Orion
50 MHz Panoramic Adapter Board by hupRF (Assembled or Kit), suitable for: FT757GX, FT840, FT847, FTdX1250, FTdx9000, TS430S, TS440S, Tentec TT550. IC740, IC781 and Lowe HF225
70 MHz Panoramic Adapter Board by hupRF (Assembled), suitable for: FT857, FT897, FT920 (1st IF), FT950, FT991, FT1000, FT1000MP, IC703, IC706, IC745, IC746PRO, IC756, 756 Pro II and III, IC7410, IC821 (1st IF), IC9100, ICR70/75 TS450, TS480 and Alinco DX SR8T
The following Hardware connection kits suit the majority of Radios - See here which Installation Kit is recommended for your particular Radio.
PAT Board Generic Plug Interface Kit GPIK Hardware Connection Kit
PAT Board Generic Socket Interface Kit GSIK Hardware Connection Kit
- Before ordering a PAT board, review the Installation Instructions for your particular Radio on the hupRF Website
Make sure you are comfortable to carry out the installation, which may void the warranty of your radio.
- Be aware that if you tap the 1st IF Filter after the 1st IF roofing Filter, the Panoramic Adapter Bandwith will be limited to the bandwidth of the 1st IF Roofing filter fitted on your Radio. If you tap the 1st IF before the 1st IF roofing Filter then you may obtain much wider Displays of 200 KHz or possibly more.
- Use of 2nd Receiver function requires tapping the IF Signal before the 1st IF Roofing Filter in conjunction with the HDSDR Application Software and requires specialist settings in the HDSDR Options menu as shown in the you tube video by K4AX. It may also require a PC to CAT Interface Adapter to control your Main Radio from the Computer used.